Operation - Epson SR-600 Bedienungsanleitung

English
❏
Do not use a hard or sharp object (such as a pen) for touch
panel input.
❏
Do not press the surface of the touch panel. Doing so may cause
color shading or distortion of the touch panel.
❏
Do not place objects on or near the touch panel. Doing so may
stain the monitor.
❏
The TFT Liquid Crystal Panel used for the DM-LS121T is
manufactured with high technology. However, in rare cases
there may be a permanently dark or light pixel.
❏
When displaying VGA screen (640 x 480) from the BIOS for
SVGABIOS, the screen is displayed in the center of the screen
and does not fill the whole screen. Stretching the display to fill
the screen is possible by changing the BIOS setting.
❏
Do not touch the internal tray lens. Make sure that no dust or
dirt gets on the lens.
❏
The MAC address is listed on a label near the DIMM on the
main board.
❏
You cannot close the CD cover if an FDD unit is installed.
However, be sure to close the CD cover to prevent static
electricity and to keep out water and dust if you are not using
an FDD unit.

Operation

Lock
The lock on the front of the
unit locks both the
CD-ROM cover and the rear
cover.
When this lock is locked, the
CD-ROM, HDD, and other
internal parts can be
removed only by a person
with the key.
Insert the key into the lock
and turn it while slightly pushing it in to lock or unlock the covers.
Turning to the right locks and turning to the left unlocks the lock.
10 SR-600 User's Manual
Unlock
Lock