Answering Machine - switel DET1571 Bedienungsanleitung

9 PABX Systems / Supplementary Services
R−functions on private branch exchanges
If your telephone is connected to a private branch exchange (PABX), functions such as call for-
warding or automatic call back can be used via the O button. Refer to the operating manual
provided with your private branch exchange as to which Flash time must be set in order to use
these functions. The sales outlet where you purchased the exchange can provide information
as to whether the telephone will work properly with the exchange. The Flash time is set using
the menu. Refer to Page 16 for the sequence of menu option selections.
R−functions and supplementary services
Your telephone supports supplementary services provided by your telephone network provider,
such as brokering or conference calls. These supplementary services are available by pressing
the O and E buttons. Please contact your telephone network provider regarding which
Flash time must be set to use the supplementary services. Also contact your telephone net-
work provider with regard to enabling supplementary services. The Flash time is set using the
menu. Refer to Page 16 for the sequence of menu option selections.
Dialling pause
If the telephone is connected to a PABX, it may be necessary to enter a dialling pause, e.g. to
wait for an outside line. Press the digit, e.g. 0 for an outside line, then press and hold the
0 button (0P....). A P appears in the display to represent the pause.
The dialling pause can also be entered with the phone numbers in the phone book.
Caller number display (CLIP
The caller number display (CLIP) is a supplementary service offered by your tele-
phone network provider. Contact your network provider for further information.
If calls have been received during your absence, they are stored in the CLIP memory when the
telephone network provider has enabled this function. If the caller has suppressed transmission
of his phone number, the corresponding message appears in the display. The phone number is
not displayed and, as a result, is not stored in the call list.
The K icon appears in the display.
K in the display is telling you that there are items on the list.

10 Answering Machine

The answering machine is operated via the base station.
Switching the answering machine on/off
Press the h button. The answering machine is switched on.
1.
Press the h button again. The answering machine is switched off.
2.
Setting the answering machine language
The language used by the answering machine can be set to one of the following languages:
German, English, French.
Press and hold the i and j buttons to set the required language.
1.
2. An acoustic confirmation signal is issued and the language abbreviation appears in the
base station display.
1
CLIP: Calling Line Identification Presentation = Display number of the caller.
1
)
102