Nolan N104 Sicherheit Und Gebrauchsanleitung Seite 14

N104 0072_N104 0072 26/08/11 09.50 Pagina 14
INSTRUCTIONS FOR USE
The N104 helmet can be used in two configurations (chin guard closed - P / chin
guard open - J). The use of the helmet in configuration P (with chin guard and visor
closed) obviously offers the highest degree of protection in comparison to configura-
tion J (with chin guard and visor open).
CHIN GUARD OPENING SYSTEM
The N104 is equipped with the unique "Dual Action" chin guard opening system.
Positioned in the centre of the chin guard, it allows for easy, one-handed opening and
prevents it from accidentally opening because the chin guard can be opened by ope-
rating the second release lever only when the first lever has already been released.
1 OPENING
1.1 Push the red release lever outwards by turning it with your thumb (Fig. 1).
1.2 Place your forefinger on top of the opening lever and push it downwards so as to
unlock the chin guard (Fig. 2).
1.3 Pull the flip-up chin guard forwards, accompanying it as it rotates upwards with
an elliptical movement (Fig. 3).
WARNING: If the helmet is used in configuration J (with chin guard open), it is
recommended to place the left side locking slider in position "J" (see instruc-
tions for P/J configuration - Fig. A, slider upwards) to secure the chin guard in
lifted position.
2 CLOSING
WARNING: In order to be able to close the chin guard, make sure the side loc-
king slider is in position "P", as shown in fig. B (lever downwards).
2.1 Pull the chin guard downwards, accompanying it as it rotates with an elliptical
movement, until you hear the clicks of the closing mechanism.
2.2 Make sure that the chin guard is properly fastened.
P/J CONFIGURATION
Fig. B (slider downwards)
When the side locking slider is in position "P" (Fig. B, lever downwards), the chin
guard can be opened and/or closed.
Fig. A (slider upwards)
When the side locking slider is in position "J" (Fig. A, lever upwards), the chin guard
cannot be closed, remaining locked in open position.
WARNING! In this configuration, the chin guard cannot be closed again. Do not
force the closing of the chin guard because it could cause damages in the hel-
met's closing mechanism. To close the chin guard, it is necessary to move the
locking slider to position P (Fig, B, lever downwards).
14