Data Cartridge Selection; Ejecting The Magazine - Sony AIT Autoloader Unit TSL-A500C Bedienungsanleitung

Data Cartridge Selection

Ejecting the Magazine

You can select data cartridges loaded into the magazine as necessary by using
the software on your computer.
Data cartridges can be selected with the SELECT and ENTER buttons on this
machine, by the following procedure.
1
Press the SELECT button to display a cartridge number on the LCD, and
press it repeatedly to change the selected data cartridge number.
2
When the desired cartridge number is selected, press the ENTER button.
The cartridge currently in the AIT drive is unloaded, and the cartridge
selected above is loaded into the drive.
Cautions:
• After inserting the magazine, about 75 seconds are needed for checking
the cartridges in the magazine. During that time, the SELECT button is
disabled. The SELECT button is also disabled when "Ready" is not
displayed.
• The SELECT and ENTER buttons have no effect if pressed while the
BUSY indicator is flashing or lit.
Press the EJECT button.
"Ejecting Magazine" appears, and after the cartridge unloads from the AIT
drive to the magazine, the magazine automatically ejects.
As much as two minutes may be required to eject a magazine.
Caution:
The EJECT button has no effect if pressed while the BUSY indicator is
flashing or lit.
Ejecting the magazine
19
Chapter 2 Operation