(De)Activating The Switching Via Front Buttons - G&D DP1.2-MUX4-USB Installation Und Bedienung

(De)activating the switching via front buttons

In the defaults, you can use the buttons on the front panel to switch between the
computers.
If desired, you can deactivate the front buttons in the setup menu.
How to enable/disable the switching via front buttons:
NOTE: Use the setup menu to (de)activate the switching via front buttons.
1. Use the terminal emulator to establish a connection to the KVM switch
and connect the serial data cable to the Service socket.
2. Use the Arrow
Select Channel via Front Button
3. Press the Space
Yes  disables the switching via front button
 enables the switching via front button
No
4. Press the S key to save your settings.
or Arrow keys to select the
entry.
key (repeatedly) to choose one of the following options:
Configuration
G&D DP1.2-MUX4-USB · 25