Auto-Accessing The First Channel - G&D DP1.2-MUX4-USB Installation Und Bedienung

Configuration

Auto-accessing the first channel

Usually, after turning on the device, the recently active channel is accessed. The set-
ting can be changed so that the computer connected to the first channel is automati-
cally accessed when the device is turned on.
How to disable/enable the automatic access of the first channel after booting:
NOTE: Use the setup menu to enable/disable the option to automatically access
the first channel after booting the device.
1. Use the terminal emulator to establish a connection to the KVM switch.
2. Use the Arrow
3. Press the Space
No  accesses the recently active channel after booting
Yes  accesses channel 1 after booting
4. Press the S
24 · G&D DP1.2-MUX4-USB
or Arrow keys to select the
key (repeatedly) to choose between the following options:
key to save your settings.
Select Ch.1 after Power up entry.