Before Use; Select Sanding Sheet; Changing Sanding Sheets; Dust/Chip Extraction - Parkside PEXS 270 A1 Originalbetriebsanleitung

Before use

GB
IE

Select sanding sheet

Removal and surface:
The material removal rate and surface quality are
determined by the grain strength of the sandpaper.
■ Please note that you need to use appropriate
sandpapers with different grains for working
different materials.

Changing sanding sheets

The random orbital sander has a Velcro sheet that
enables fast and simple changing of the sanding
sheets.
♦ Lift the sanding sheet
off the pad
NOTE
► Before fitting a new sanding sheet
any dust and dirt from the pad
♦ Make sure that the holes on the sanding sheet
match up with the holes on the pad

Dust/chip extraction

■ Please refer to the section entitled "Safety
information".
Dust extraction unit with dust collecting
device:
♦ Push the dust catcher
♦ To empty the dust catcher
appliance.
NOTE
► Check the dust catcher
it in good time to ensure optimal dust extrac-
tion.
6
on one side and pull it
to remove it.
.
.
fully onto the appliance.
, pull it from the
regularly and empty
External extraction appliance:
Connecting:
♦ Push the adapter for external vacuum extraction
onto the exhaust outlet
right to lock it. If necessary, use the reducer
by pushing it onto the adapter for external
vacuum extraction
♦ Push the hose from a suitable dust extraction
appliance (e.g. a workshop vacuum cleaner)
onto the adapter for external vacuum extraction
(with the reducer
Removal:
♦ Pull the vacuum cleaner hose off the adapter
for external vacuum extraction
♦ Turn the adapter for external vacuum extrac-
tion
cer , if attached) off.
, remove

Operation

Switching on and off
NOTE
► Always switch on the random orbital sander
before making contact with the material, then
apply it to the workpiece. During operation,
you can choose between instantaneous and
continuous operation.
Switching to instantaneous operation:
♦ Press the ON/OFF switch
Switching off instantaneous operation:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
in and then press the lock button
Switching off continuous operation:
♦ Press the ON/OFF switch
and turn it to the
.
if necessary).
to the left and pull it (and also the redu-
.
and keep it pressed
and release it.
PEXS 270 A1
.
.
.