Cleaning And Care; Cleaning The Appliance; Cleaning The Accessories; Cleaning The Blender - Silvercrest SKV 1200 A1 Bedienungsanleitung

Cleaning and care

DANGER – RISK OF ELECTRIC SHOCK!
► Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
Never immerse the appliance in water or
any other liquid!
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive or aggressive cleaning
materials. These may damage the surfaces.
NOTES
► We recommend cleaning the appliance
directly after use. This makes food residues
easier to remove.
► Processing foods that contain strong pig-
ments, such as carrots, may lead to staining
of the plastic parts. These stains can be
removed using a little cooking oil.

Cleaning the appliance

■ Wipe the appliance with a damp cloth. For
stubborn soiling use a mild detergent on the
cloth. Wipe off any detergent residue using a
cloth moistened with clean water. Then dry the
appliance carefully.

Cleaning the accessories

■ Clean the mixing bowl
of the filling opening
measuring cup , the drive protection cover
the blender tool
in warm water with a little detergent. Any residues
can be removed with a washing-up brush. Rinse
all parts with warm clean water and make sure
that all parts are dry before re-using them.
■ 10
│ GB
, the lid , the cover
, the blender lid
and the attachments
NOTE
► The attachments
mixing bowl
in the dishwasher.
► If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere. This may cause
them to become deformed.
► If possible, place all plastic parts in the top
basket of the dishwasher.

Cleaning the blender

WARNING! RISK OF INJURY!
► Do not touch the blades
hands.
■ Clean the blender
with measuring cup
a mild detergent (washing-up liquid). Then rinse
all parts with clean water so that no detergent
residues remain.
■ If this cleaning is not sufficient, you can unscrew
the blade holder
blender jug
with
,
, the lid
are also suitable for cleaning
with your bare
and the blender lid
in warm water and add
with the blade
using the blender tool
SKV 1200 A1
and the
from the
: