Technical Data - Valeo Thermo S 160 Einbauanweisung

Thermo S 160/230/300/350/400
Heater
ECE Type Approval Number
Kind of construction
Heating flow (at ambient temperature of 20°C)
Fuel
Fuel consumption
Rated voltage
Operating voltage range
Rated power consumption at 24V *
Max. permitted temperature of sucked com-
bustion air
Permitted ambient temperature during operation °C
Permitted storage temperature
Permitted operating overpressure
Capacity of the heat exchanger
Minimum water flow **
Minimum capacity of the water system
CO in exhaust gas at rated voltage
2
Heater dimensions (tolerance ± 3 mm)
Weight
* without circulating pump
Max. continuous current of the circulating pump 10A, max. peak current for the duration of 0,5 s = 90 A - For the maximum efficiency and reliability, we recommend
Spheros-circulating pumps! To reduce the in-rush current the circulating pump can be electronically switched by the control device for a short duration during start-
up. Verify compatibility while using pumps of other manufacturers!
** Minimum water flow at coolant temperatures above 50°C
Below 50°C a lower water flow is permitted, if the occurence of vapor bubbles due to local overheating safely can be excluded.
Thermo S 160 Thermo S 230 Thermo S 300 Thermo S 350 Thermo S 400
E1 122R 00 0208
kW 16
(kcal/h) (13 800)
kg/h 1.6
V =
V =
W 50
°C
°C
bar
l
l/h 1400
l
Vol %
mm
kg 18.4
0226 0227
High pressure atomiser
23 30
(20 000) (26 000)
Diesel / Heating oil
2.5 3.0
24
20...30
65 90
+ 85
-40...+ 100
-40...+ 110
max. 2.0
1,8
1900 2400
10.0
9.5 + 1.5
Length 600 / Width 247 / Height 220
18.8

Technical data

0228 0225
35 40
(30 000) (34 000)
3.6 4.1
120 180
2700 3200
61