BabySafe Schnauzer Anleitung Seite 47

To adjust the height of the headrest firstly open the harness
buckle by pressing the red button in the centre of the buckle
(26) locate the harness adjustment lever (M) which is located
behind the seat cover in-between the harness straps (24). Pull
this lever towards you and move the headrest up or down to the
appropriate height and release.
Try to move the headrest to check it is locked in position.
HARNESS TENSION AND ADJUSTMENT
Loosen the Harness: Press on the Harness Adjustment Button
{L} positioned near the front of the car seat, and pull on the two
shoulder straps simultaneously (23).
Tighten the Harness: Pull firmry on the Harness Adjustment Strap
(at the front of the car seat; it is not necessary to press on the
Adjustment Button (29).
21