Before Initial Operation; Temperature Setting; Operation Parameters - Schneider SCB300V2B Bedienungsanleitung

4.1 Before initial operation

1. Clean the appliance thoroughly. Be very careful especially inside the appliance.
2. After having installed the appliance wait 4-6 hours before you connect it
to the mains.
3. • Positions 1 and 2 correspond to a lower cooling power.
• Positions 3 and 4 correspond to a normal cooling power.
• Position 5-7 generates the appliance maximum cooling power.
In normal usage conditions you are advised to select a positions 3 or 4 for proper
conservation of foodstuff in the appliance.
4. Afterwards operate the appliance after 24 hours for the first time.
5. The temperature of the freezer should reach -18
the exact temperature of the cooling and freezer compartments using a suitable
thermometer .
5
WARNING! THE THERMOSTAT CONTROLS THE COMPRESSOR
ONLY. You must unplug the appliance to disconnect it from the mains.

4.2 Temperature setting

1 Warmest setting
3/4 Recommended setting for daily use at an average ambient
temperature of 16°C to 38°C.
7 Coldest setting

4.3 Operation parameters

1. The appliance can only reach the relevant temperatures when:
a. the a ambient temperature meets the climatic class.
b. the doors close properly.
Not included in delivery
5
0 C or colder. You can check
27