Operation - SEVERIN Hair Care HT 0770 Bedienungsanleitung

disposed of through local special garbage
collection points.
Always remove the batteries during extended
periods of non-use. This will help to prevent
damage to the appliance caused by leaking
batteries.

Operation

- Remove the protective cover.
- Use the On/Off switch to turn the appliance
on.
- Start shaving the desired skin areas.
- Use the On/Off switch to turn the appliance
off after use.
- Replace the protective cover on the shaving
head after every use.
Shaping head
- The shaping head allows for precise
shaping of the beard:
- Use the ribbed area to slide out the shaping
head until it is heard locking into place.
- Start shaping the beard exactly as desired.
- Slide the shaping head back to its former
position.
A few remarks on shaving
- We recommend shaving before washing or
taking a shower, as the skin will swell
slightly after washing.
- Move the shaving head at right angles to
the skin against the natural growth of the
beard, while tightening the skin with your
fingers.
Cleaning and care
■
Switch off the appliance and remove the
batteries before cleaning.
■
For safety reasons, the appliance must not
be immersed in nor allowed to come into
contact with liquid. The housing may be
wiped with a slightly damp cloth.
■
Do not use abrasives or harsh cleaning
solutions.
Shaving head
- After use, remove hair residue from the
blade unit with the cleaning brush. To
remove the head, grip it on both sides and
pull off.
Caution! The blade unit is extremely
sharp! There is a risk of injury.
- The shaving foil should only be cleaned by
gently tapping it. Do not use the cleaning
brush.
- The blade unit is subject to wear and must
be replaced if it shows signs of over-usage.
- Put the protective cover on the shaving
head when not in use.
Shaping head
- Slide out the shaping head and clean it with
the cleaning brush.
Caution! The shaping head is extremely
sharp! There is a risk of injury.
- Before use, and also after the appliance
has been used for approx. 15 minutes, put
a drop of acid-free oil between the trimming
comb and the trimming blade of the
shaping head, and then switch the
appliance on briefly to ensure that the oil is
evenly distributed. Regular oiling guarantees
good cutting performance over a long
period and thus a long service life.
Disposal
Do not dispose of old or defective
appliances in domestic garbage; this
should only be done through public
collection points.
Guarantee
This product is guaranteed against defects in
materials and workmanship for a period of two
years from the date of purchase. Under this
guarantee the manufacturer undertakes to
repair or replace any parts found to be
defective, providing the product is returned to
10