Documentation; Safety Information; Intended Use - Siko SG62 Originalmontageanleitung

SG62
18

Documentation

1 Documentation
The following documents describe this product:
• The data sheet describes the technical data, the dimensions, the pin
assignments, the accessories and the order key.
• The mounting instructions describe the mechanical and electrical
installation including all safety-relevant requirements and the associ-
ated technical specifications.
These documents can also be downloaded at
com/p/SG62".

2 Safety information

2.1 Intended use

The SG62 wire-actuated encoder is a high-precision measurement system.
The wire-actuated encoder serves exclusively for the acquisition of linear
distance values. The measured values are transferred to an upstream sig-
nal as an electronic output signal.
1. Observe all safety instructions contained herein.
2. Arbitrary modifications and changes to this wire-actuated encoder are
forbidden.
3. Observe the prescribed operating and installation conditions.
4. Operate the wire-actuated encoder exclusively within the scope of
technical data and the specified limits (see chapter 9).
SG62 · Date 20.11.2015 · Art. No. 88572 · Mod. status 358/15
English
"http://www.siko-global.