Remote Control Via Optional Rc-2 Controller; Cleaning And Maintenance; Replacing The Fuse - EuroLite LED SCY-200 TCL DMX Bedienungsanleitung

Remote control via optional RC-2 controller

Connect the remote control with the LED SCY-200 TCL DMX device via the connection cable with stereo
jack.
1. Press the SPEED-button in order to select Sound Control or Auto Mode:
- When the corresponding LED is on, it is in Auto Mode
- When the corresponding LED is off, it is in Sound Control Mode
2. Press the PROGRAMS/STROBE-button in order to select internal programs (1 - 10) or strobe.
- When the button is double-clicked, the internal programs progress from one program to the next.
- When the button is pressed and held for 3 seconds, strobe function is activated.
3. Press the BLACKOUT-button, in order to set Blackout.
The corresponding LED is permanently on in Blackout mode.

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
25/26 00056924.DOC, Version 1.2