Westfalia 80 84 59 Bedienungsanleitung Seite 11

Sliding the LED Head
If the object to be lifted is situated in a
very thigh space, you can slide the
complete LED head from the magnet
in direction to the push button. On
both sides of the pickup tool you will
find rubber rings. Up to these rubber
rings the LED head can be pushed.
Inserting/replacing the Batteries
1. Unscrew the screws of the battery compartment and remove the
lid.
2. Place the
into the battery com-
partment as shown in
the drawing.
tighten the
compartment lid.
3. Remove the spent batteries as soon as possible and replace the
batteries with fresh one of the same type and dimensions. The
pickup tool requires 3 button cells of the type LR41.
Installation and Using
batteries
Re-
battery
+
–
10
Rubber Ring
+