Teac DR-H300p Bedienungsanleitung Seite 13

A STANDBY/ON
Use this button to turn the unit on and standby.
The standby indicator lights in the standby mode. It turns off
when the unit is turned on.
The equipment draws nominal non-operating power from
the AC outlet with its STANDBY/ON in the standby position.
B
PHONES
For private listening, insert the headphones plug into this jack,
and adjust the volume using the VOLUME knob.
C
AUX 2 IN
You can connect a portable audio player to this jack.
D USB connector
You can connect an USB memory device to this connector.
E RDS, REPEAT
In DISC or USB mode, use this button for repeat playback.
In FM tuner mode, use this button for RDS function.
RDS is available in European countries only.
INFO does not function on this model.
F
SCAN (m/,), PRESET
In the preset tuning mode, use these buttons to select a
preset channel.
In DISC or USB mode, use these buttons to search for a part
of a track.
G MEMORY, PROGRAM
In DISC or USB mode, use this button to program tracks.
In TUNER mode, use this button to preset stations.
H
OPEN/CLOSE
Use this to open and close the disc tray.
I
FUNCTION
Use this button to select a function (FM, AM, DISC, USB,
AUX1 or AUX2).
J Play/Pause (y/J), STEREO/MONO
In DISC or USB mode, use this button to start or pause
playback.
In FM tuner mode, use this button to select stereo or
monaural.
SELECT does not function on this model.
K Stop (H), SCAN
In DISC or USB mode, use this button to stop playback.
In TUNER mode, use this button to preset stations
automatically.
L
SKIP (.//), TUNING
In DISC or USB mode, use these buttons to skip tracks.
In TUNER mode, use these buttons to tune in a station.
M VOLUME
Turn this knob (or press the VOLUME buttons of the remote
control unit) to adjust the volume level.
N
Display
O
Disc tray
P
Remote control sensor
Receives signals from the remote control unit. Point the
remote control unit at this sensor when operating the remote
control unit.
Note:
To simplify explanations, instructions in this manual refer to
the names of the buttons and controls on the front panel
only. Associated controls on the remote control will also
operate similarly.
13