Fading In Or Out; Recording From Cds; Recording A Cd By Specifying Tape Length (Time Edit) - Sony CDP-CE375B Bedienungsanleitung

Programming the CD tracks
(continued)
Changing the track order
You can change your programme before you
start playing.
To
Erase a track
Erase the last track
in the programme
Add tracks to the
end of the
programme
Change the whole
programme
completely

Fading In or Out

You can manually fade in or out to prevent
tracks from starting or ending abruptly.
Note that you cannot use this effect when you
use the DIGITAL OUT (OPTICAL) connector.
To
Start play fading in
End play fading out
Fading time lasts for 5 seconds.
12
GB
You need to
Press CHECK until the track you
don't want appears in the display,
then press CLEAR.
Press CLEAR. Each time you
press the button, the last track will
be cleared.
Follow Steps 2 through 4 of the
programming procedure.
Hold down CLEAR until "ALL
CLr" appears in the display.
Create a new programme
following the programming
procedure.
Press FADER
During pause. "FADE" flashes.
The play fades in.
When you want to start fading
out. "FADE" flashes. Then play
fades out and the player pauses.

Recording From CDs

Recording a CD by
Specifying Tape Length
(Time Edit)
You can have the player create a programme
that will fit the length of the tape.
The player automatically creates a programme,
keeping the original order of the disc.
The programme can contain up to 32 steps (a
pause inserted between steps is counted as one
step).
Note that tracks numbered over 20 cannot be
programmed automatically.
1
Press DISC SKIP to select the disc.
2
Press TIME EDIT repeatedly before you
start playing until "EDIT" appears and
"A" in the indication flashes in the
A
display.
3
Press m or M to specify the tape
length.
Each time you press these buttons, the
display changes as shown below, with the
tape length of one side following each
indication.
C-46 23.00 C-54 27.00
- -. - - C-90 45.00
4
Press TIME EDIT to have the player
create the programme.
The display shows the tracks to be recorded.
"B" in the indication flashes in the
A B
display.
5
When you record on both sides of the
tape, press TIME EDIT again.
The player inserts a pause, then creates the
programme for side B. The display shows
the programmed tracks.
When you record on one side of the tape,
skip this step.
C-60 30.00
C-74 37.00