Option Menu - Sony SDM-X202 Bedienungsanleitung

OPTION menu

You can adjust the following items using the OPTION menu.
• Zoom
OPTION
• Menu Position
• Audio Select
• USB Select
• Language
• Menu Lock
• Reset
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
press the OK button.
The OPTION menu appears on the screen.
3 Press the M/m buttons to select the desired item and
press the OK button.
Adjust the selected item according to the following
instructions.
x Zoom
The monitor is set to display the picture on the screen in full,
irrespective of the picture's mode or resolution in the default
setting (Full2).
You can also view the picture in its actual aspect ratio or
resolution.
1 Press the M/m buttons to select "Zoom" and press
the OK button.
The options are displayed on the popup menu.
2 Press the M/m buttons to select the desired mode.
• Full2 (The default setting): The input signal is displayed
on the screen in full, irrespective of the picture's
mode or resolution.
• Full1: The input signal is displayed on the screen at its
actual aspect ratio. Therefore, black bands may
appear at the top and bottom of the picture,
depending on the signal.
• Real: The input signal is displayed on the screen at its
actual resolution. Sub-1600 × 1200 signals are
displayed at the center of the screen surrounded by
a black frame.
Note
When you use 1600 × 1200 resolution signals, the above mentioned
settings are not available. The picture is displayed on the screen in full.
1: HD15
Zoom : Full2
Menu Position
Audio Select : Auto
USB Select : Auto
Language : English
Menu Lock : Off
Reset
1600 × 1200/60 Hz
Select Set Exit
OK MENU
(OPTION) and
x Menu Position
You can change the menu position if it is blocking an image on
the screen.
1 Press the M/m buttons to select "Menu Position"
and press the OK button.
The "Menu Position" adjustment menu appears on the screen.
2 Press the M/m buttons to select the desired position.
You can choose one of 9 positions where the menu will
appear.
x Audio Select
Select the audio input when connecting to both of the monitor's
audio input jacks for INPUT1 and INPUT2.
1 Press the M/m buttons to select "Audio Select" and
press the OK button.
The options are displayed on the popup menu.
2 Press the M/m buttons to select the desired mode.
• Auto (The default setting):To select either audio input
by switching with the INPUT button.
• Input1: To select the audio input from the AUDIO1 jack.
• Input2: To select the audio input from the AUDIO2 jack.
x USB Select
This monitor is equipped with two USB upstream connectors. The
effective upstream input switches, depending on this item setting.
1 Press the M/m buttons to select "USB Select" and
press the OK button.
The options are displayed on the popup menu.
2 Press the M/m buttons to select the desired mode.
• Auto (The default setting):To select either upstream
input by switching with the INPUT button.
• Input1: To select the upstream input from the USB
connector for INPUT1.
• Input2: To select the upstream input from the USB
connector for INPUT2.
Notes
• When you set this item to either "Input1" or "Input2," the upstream
input does not switch even if the video input is switched with the
INPUT button. If you want to link the upstream input to switching with
the INPUT button, set the item to "Auto."
• When you connect devices that require prolonged data communication
with the computer, such as a printer or a scanner, to a downstream
connector on this monitor, set this item to either "Input1" or "Input2."
Otherwise, the data communication with the computer may be
interrupted each time you press the INPUT button, and a failure of the
printing or scanning may occur.
GB
17