Installing Of Monitor; Wiring; Connecting The Video Door Phone - Extel WEVP 629 E Type HD-2253 Installations- Und Bedienungsanleitungen

b. Installing of monitor
1. Fix the wall-mounted support (2).
2. Connect the wires from the external camera observing the wiring diagram (page 6).
3. Put the screen (1) on the wall support (2).
4. Once the camera connected, connect the power plug (3).
5. After being sure the installation is completed, connect the adapter power supply plug to mains outlet.
Note : if the power supply cord is cut, respect polarity
1
5

WIRING

To avoid disturbance and malfunction risks, do not put "low current" wires in the same sheath as high current
wires.
a. Connecting the video door phone
1. Connect the following wires according to the wiring diagram
2. To connect the camera, only 6 wires are necessary for all the functions: ring tone, video image, door phone
and door-opener control.
Caution : In any case, do not double the wires to increase size
Observe the polarity between the screen and the external camera (no polarity is to be observed for the door-
opener control)
Important :
3
CFI EXTEL WEVP 629 - 12/2009 - V1
2
1.60m
5GB