Oakley DOUBLE TAP Bedienungsanleitung Seite 9

7 | DOUBLE TAP INSTRUCTION MANUAL
TO MEASURE ADDED TIME
Added time (cumulative time) is a measure of how much time
has passed without including pauses. This feature lets you
exclude the time intervals you do not want to measure.
START TIMING
• Press button "A".
STOP TIMING TEMPORARILY
• Press button "A" to stop timing temporarily.
• Press button "A" again to continue timing.
Continue to use button "A" to add additional time
intervals to the total measure of time. When using
button "A" only, the time that passes while the
chronograph hands are not moving IS NOT ADDED to
the total measure of time. See below if you wish to
include this "split time" in the total measure of time.
RESET
• While timing is stopped, press button "B".
USING THE CHRONOGRAPH - CON'T
TO MEASURE SPLIT TIME
Split time (intermediate time) is a measure of the current
time total, taken without stopping the timing circuit. The
hands pause so you can read them, then they catch up to the
ongoing time total.
START TIMING
• Press button "A".
PAUSE THE HANDS BUT CONTINUE TIMING
• Press button "B" to pause the chronograph hands and
read the current time total.
Although the hands are no longer moving, time is still
being measured.
• Press button "B" again to move the hands to the
currently running time total.
Continue to use button "B" to pause the hands when
desired. Time continues to be measured.
STOP TIMING AND DISPLAY THE FINAL TIME TOTAL
• While the hands are moving, press button "A" to fully
stop timing and display the total time measured.
RESET
• While timing is stopped, press button "B".