Cleaning
GB
Cleaning the appliance
Storage
12
DANGER
Risk of fatal injury from electrocution!
►
Remove the plug from the mains power socket before beginning to clean
the device.
►
Ensure that no moisture can penetrate the device during cleaning.
CAUTION
Possible damage to the appliance.
►
Do not use aggressive or abrasive cleaning agents, as these may corrode
the surface of the casing.
►
Do not use any hard or sharp objects to remove any adhesive from the
welding wire 4. Otherwise the welding wire 4 or the insulation could
be damaged.
♦
Clean the surface of the housing of the appliance with a lightly moistened
cloth and a mild detergent.
Wipe off the upper 9 and the lower sealing rings 5, as well as the press
♦
seal 0 with a damp cloth. Ensure that the appliance is dry before using it
again.
The appliance has a built-in cable retainer 3 on the underside of the housing,
on which you can wrap the power cable when it is not in use. This prevents the
power cable from getting caught or soiled, or becoming a source of danger by
hanging loosely down.
CAUTION
Possible damage to the appliance.
Do not click the appliance lid 1 closed for storage! When the appliance
►
lid 1 is clicked closed it exerts permanent pressure on the upper 9 and
lower sealing rings 5, as well as the press seal 0. This can negatively
aff ect their function.
♦
Store the appliance in a clean, dry place away from direct sunlight.
SFS 110 A1