785
A
B
9
8
1
6
7
Fig. 4-4
Dimensions, top of the device - Type ...04P50D/...
08P50D
Item
Designation
1
Solar - inflow
2
Cold water
3
Domestic hot water
4
Heating inflow
5
Heating return flow
6
Connection for refrigerant gas line
7
Connection for refrigerant fluid line
8
Solar – inflow (...Biv type only)
9
Solar – return flow (...Biv type only)
A
front
B
rear
Tab. 4-1
4.2
Transport and delivery
WARNING
The Daikin Altherma EHS(X/H) is top-heavy in the unfilled
state and could tip over during transport. That could put
persons in danger or damage the unit.
▪ Secure the Daikin Altherma EHS(X/H) well, transport
carefully, use the handles.
The Daikin Altherma EHS(X/H) is delivered on a pallet. All industrial
trucks, such as lifting trucks and forklift trucks, are suitable for trans-
porting it.
Scope of delivery
▪ Daikin Altherma EHS(X/H) (preassembled),
▪ Bag of accessories (see
Fig.
4-5),
▪ Document pack.
Daikin Altherma EHS(X/H)
Daikin Altherma integrated solar unit
008.1444099_00 – 07/2018 – EN
452,5
332,5
249
162,5
147,5
0
3
5
2
4
4
D (1x)
B (3x)
E (2x)
F (2x)
H (2x)
K (1x)
Fig. 4-5
Contents of bag of accessories
Item
Designation
A
Handles (only required
for transport)
B
cover panel
C
Hose connecting piece
for safety overflow
D
Assembly wrench
E
Ball valve
F
Flat gasket
Tab. 4-2
For further accessories for the Daikin Altherma EHS(X/H), see Price
list.
4.3
Installing the heat pump
4.3.1
Selecting the installation site
CAUTION
If the total refrigerant charge in the system is ≥ 1.84 kg, it is
essential to comply with additional requirements for min-
imum footprint and minimum ventilation openings. Ob-
serveChap.
10.4.
Information on the total refrigerant charge can be found on
the type plate of the outdoor unit. Please follow the installa-
tion instructions.
Set-up and installation
C (1x)
A (2x)
G (1x)
I (1x)
J (1x)
L (1x)
Item
Designation
G
O-ring
H
Cable tie
I
Plug bracket
J
Venting hose
K
Drain hose cover
L
RoConPlus controller
rotary switch
Installation and maintenance instructions
13