I) Attaching And Fastening The Vehicle Body; J) Controlling The Vehicle - Reely Dragontail Bedienungsanleitung

i) Attaching and fastening the vehicle body

Insert the tube of the aerial from underneath the car body through the hole intended for that purpose.
Now put the vehicle body on the holders and fasten it using the safety clips previously removed.
Your vehicle is now ready for its first test run!

j) Controlling the vehicle

Operate the throttle very carefully and do not drive too fast at the beginning until you get used to how the
vehicle responds.
Do not make quick jerky movements on the operating elements of the remote control.
If the vehicle shows a tendency to pull towards the left or the right, set the steering trim ("ST.TRIM") on the transmitter
accordingly.
When changing between forward and reverse, the throttle has to be in centre position (centre position = motor not
moving) briefly (approx. 1 second). If the throttle is pushed from forward to reverse directly, the brake function of the
drive is activated (vehicle will NOT reverse).
Examples:
1. Let go of throttle; vehicle rolls to a halt (or does not move; if necessary, adjust the throttle trim ("TH.TRIM"))
2. Drive forward, pull the throttle towards the handle
3. Drive forward and then brake (vehicle slows down; does not roll to a halt slowly); push throttle away from the grip
without stopping
4. Drive forward and then reverse (wait briefly before changing direction!)
32
Wait briefly