PERFECTPRO ROCK HART BT Bedienungsanleitung Seite 12

Automatically updating the clock
. Press the Standby button to switch on your radio.
2. Press and hold the Menu button until the Advanced menu of the
current mode shows on the display.
3. Rotate the Tuning control until 'System ' appears on the display.
Press the Tuning control to enter the setting menu.
4. Rotate the Tuning control until 'Time' appears on the display.
Press the Tuning control to enter the setting menu.
5. Rotate the Tuning control until 'Auto update' appears on the display.
Press the Tuning control to enter the setting menu.
6. Rotate the Tuning control to choose an update option from 'Update
from Any', 'Update from DAB', Update from FM' or 'No update' as
required. The current update option will be marked with an asterisk.
Press the Tuning control to confirm your choice. The radio will
return to the previous menu.
Note:
If you select 'Update from Any', 'Update from DAB', Update from
FM' the current time received will be displayed. If no signal is found
you should either position the radio or its antenna so that a signal
can be received, or revert to manual clock mode.
GB