Picture / Video Mode - Rothenberger ROCAM 4 Plus Bedienungsanleitung

Choose the type of damage in the damage catalog and confirm
bottom of the screen, and also by saving images/videos:
Setting up damage catalog:
- Foreign body, free
- Blockage
- Pool of water
- Leaking pipe or collar connector
- Crack in longitudinal direction
- Crack in transverse direction
- Broken fragments
- In-feed not installed correctly
- Laid incorrectly
- Wear, mechanical
- Wear, corrosive
- Encrustation
- Deformation
Battery Indicator:
Colour white:
to
tion
Colour red:
Battery empty,
(-10° to 50°C)
If the ROCAM 4 Plus is used outside the specified operating temperature range,
faults can occur on the screen! The ROCAM 4 Plus may switch itself off auto-
nomously!
3.9

Picture / Video mode

 Select picture mode
 Touch the record picture / video button
tomatically saved as a jpg, avi, or wav files.
 Open photo / video gallery
stalled in monitor).
 Scroll left
Video mode:
Play saved video
Pause. Video stops and the current view can be edited
mode)
File naming
Delete video's. Confirm with
30
Up to 100%, up to 20% battery capacity,
battery temperature exceeds the operating temperature
or video mode
and select required photo / video (only if SD-card is in-
or right , to select saved pictures or Videos.
yes or
ENGLISH
. This will be shown in the left
Add a new damage
Delete damage
switch off damage
back
confirm
.
.Touch the stop video button
no / back
mains network opera-
. Data is au-
and then saved (s. photo