Speed
M
M
MAXIMUM OPERATING TIME
The appliance may not be operated continuously for an elongated time to avoid
overheating. Make breaks, depending on the load and accessory you use. Please
observe the following maximum operating times:Wire tools: max. 10 minutes of
continuous operation.Bar Blender: max. 1 minute of continuous operation.Chopper
System: max. 15 seconds of continuous operation.
Allow the appliance to cool down to room temperature in time, before using the
appliance again.
OVERLOAD PROTECTION
The Design Hand Mixer Pro is fitted with a self-resetting overload protection device,
which safeguards against overheating the motor. Overheating may be caused by
...too long time of continuous operation without breaks (see: 'Maximum Operating
Time').too much food in the mixing container.
•
hard ingredients block the accessories.
•
too sticky and too heavy load (e.g. heavy yeast dough).
If overheating occurs, the appliance will automatically switch off the motor. In this
case, switch OFF the appliance (speed selector to "0") and unplug. Remove any
obstacle and leave the appliance cool down for at least 30 minutes. Thereafter, you
may try to reactivate the appliance.
TIPS FOR BEST RESULTS
•
First fill liquid ingredients into the mixing container (e.g. mixing bowl or blender
container), if your recipe does not require any other method.
•
Process your food only for some seconds. Then check for the required consistency.
Avoid over-processing, because this may produce watery and too mushy results.
With the wire tools, you may use several speed settings ("1" to "5") and the pulse
function. This way, you can process a variety of different ingredients. Adapt
the speed to the consistency of your food and the desired results. With the bar
blender and chopper system, high speed processing is crucial for getting good
Action
Description
Puréeing fruits and vegetables for heavy juices. Puréeing potatoes
Bar blender
and the ingredients for cream soups.
Chopper
Food processing, meat or vegetables.
55