Cleaning And Care - Silvercrest SHBS 5 A1 Bedienungsanleitung

Cleaning and care

DANGER
Danger to life due to electric shock!
► Pull the mains power adapter
► Never touch the mains power adapter
unplugging it.
► Always keep the mains power adapter
CAUTION
Possible damage to the appliance.
► The hair and beard trimmer may never be immersed in water or other liquids for cleaning,
since the appliance is not watertight. If this is done, live parts (batteries) can be damaged.
► Do not use aggressive or abrasive cleaning agents, as these can damage the upper surfaces.
► Clean the housing only with a soft damp cloth and a mild detergent.
♦ Switch the hair and beard trimmer off by pressing the ON/OFF switch
♦ Disconnect the cable from the appliance and pull the mains power adapter
power socket.
♦ If any comb attachment (
♦ Wash the comb attachment (
♦ Dry the comb attachment (
♦ Press your thumbs against the cutter attachment to release it from its holder (see Fig. D).
♦ Use the cleaning brush supplied to remove any hair residue from the cutter attachment.
♦ Once you have completed cleaning, plug the cutter attachment plug-in tab back into the
mounting opening on the appliance (see Fig. E).
♦ Push the cutter attachment back onto the appliance by pressing lightly from above (see Fig. F).
NOTE
► In order to reduce friction, occasionally apply a couple of drops of blade oil (accessory)
between the blades, and then distribute it evenly. You can also use any non-corrosive oil
(e.g. sewing machine oil). Wipe off any access oil with a soft cloth.
SHBS 5 A1
out of the power socket before cleaning the appliance.
6
with wet hands, especially when plugging it in or
6
and the cable dry.
6
or ) is attached, remove this fi rst.
11 12
or ) if required under running water.
11 12
or ) thoroughly afterwards.
11 12
3 .
out of the
6
13
GB
IE