Measuring An Object From The Outside; Measuring An Object From The Inside; Measuring The Depth Of An Object; Examples Of Use - Powerfix Z22855 Bedienungsanleitung

j
Press the inch / mm key
(inch or mm) you wish to use. Either "mm" or "inch" will
appear to the right of the figures in the LCD display
j
Press the key to obtain the zero setting (ZERO)
to reset the LCD display

Measuring an object from the outside:

j
Move the external measuring jaws
handwheel
7
Place the external measuring jaws
be measured.
j
Turn the handwheel
Move the external measuring jaws
touch both sides of the object you want to measure. Please
ensure that you do not damage the object you want to
measure by subjecting it to too much pressure.

Measuring an object from the inside:

j
Place the internal measuring jaws
you want to measure.
j
Turn the handwheel
internal measuring jaws
on both its inner sides. Please ensure that you do not dam-
age the object you want to measure by subjecting it to too
much pressure.

Measuring the depth of an object:

j
Move the depth-measuring blade
j
Put the depth-measuring blade
the surface (e.g. inside a hole).
j
Slide the body of the caliper downward until you feel
resistance.
j
Ensure that you do not damage the depth-measuring blade
or the object you want to measure by exerting too much
6
pressure on them.
j
The LCD display
j
After carrying out the measurement, move the external
measuring jaws
again by turning the handwheel
j
Switch the LCD display
ON / OFF key
Tip: The LCD display
after approx. 3 minutes.
j
Tighten the locking screw
until you feel some resistance.

Examples of use

Q
Tip: When measuring, always proceed as described in the
chapter on using the caliper.
to set the unit of measurement
3
to zero.
5
outwards anti-clockwise.
inwards clockwise.
7
outwards anti-clockwise. Move the
7
apart until they touch the object
2
6
now displays the dimensions.
5
/ internal measuring jaws
11
off again by pressing the
5
.
10
automatically switches itself off
5
again by turning it clockwise
4
9
apart by turning the
11
against the object to
11
together until they
11
against the object
2
out of the caliper.
6
in position until it touches
together
2
inwards clockwise.
7
.
5
in order
GB/IE 9