CST/BERGER LMPL20 Originalbetriebsanleitung Seite 35

Remote Control Menus
Navigating in the menus of the remote control takes
place analogue to navigating in the menus of the
measuring tool.
– Press button 18 twice.
The main menu is displayed.
– Select a submenu with buttons 19.1/19.2 and
20.1/20.2.
The selected submenu point is indicated by an
arrow symbol on the side.
– Press button 21 to call up the desired submenu.
Note: Submenus can be protected against unauthor-
ised access (" " symbol next to the submenu). Ena-
bling is possible only via the "SECURITY" submenu or
by entering a password.
Also see "SECURITY" Submenu, page 34.
Main Menu of the Remote Control
Symbol
Submenu
LASER POWER
GRADE UNITS
RF ADDRESS
Position of the remote
control
"Battery-charge Condition" Submenu
In the "Battery-charge condition" submenu, you can
view the current charge condition of the measuring
tool's batteries/battery pack and of the remote con-
trol's batteries.
– Press button 18.
The current charge condition is displayed.
– Press button 18 to return to the main menu.
2 610 A15 123 • 4.8.09
"Position of the Remote Control" Submenu
In the "Position of the Remote Control" submenu, the
indication of the lateral alignment with respect to the
position of the remote control can be adjusted.
When the position of the remote control is set cor-
rectly, the arrow symbol will correspond with the laser
beam direction, regardless of whether you are stand-
ing in front or behind the measuring tool with the
remote control.
The following options are possible:
Symbol
See
page
33
33
34
– Select the desired position in front or behind the
measuring tool with button 20.1 or 20.2 and con-
35
firm the entry with button 21.
– Press button 18 to return to the main menu.
Meaning
Position of the remote control
behind the measuring tool
= Indication of the lateral alignment
above the grade readout.
Arrow symbol points toward the
measuring tool: Laser beam points
away from the remote control.
Position of remote control in front of
the measuring tool = Indication of
the lateral alignment below the
grade readout.
Arrow symbol points away from the
measuring tool: Laser beam points
towards the remote control.
English | 35