Warranty - AL-KO HW 4500 FCS COMFORT Betriebsanleitung

Warranty

Switching condi-
tion
Pump switches
off via pressure
switch.
Fault message
Pump switches
off via electronics
(dry running pro-
tection).
WARRANTY
We will address claims for any defects in materials and workmanship during the statutory period of limi-
tation by means of repairs or replacements of our choice. The period of limitation is governed by the laws
of the country in which the machine was purchased.
Our warranty applies only if:
The machine has been properly handled
The operating instructions have been adhered
to
Original replacement parts have been used
The warranty does not cover:
Damage to paint work through normal use
Parts subject to wear as indicated in the replacement parts list with a box [xxx xxx (x)]
Internal combustion engines – separate warranty conditions of the respective engine manufacturer
apply
The warranty period begins with the purchase by the first buyer. The warranty period begins on the date
that appears on the original purchase receipt. In the event of a warranty claim, please your contact sup-
plier or the nearest authorised customer service centre with this warranty declaration and the purchase
receipt in hand. This warranty does not affect the legal warranty claims by the purchaser against the
seller.
467776_d
LED display
LED displays off.
LED display ALARM is flashing.
Function description/actions
Pump achieving the set pressure
Check all screwed fittings, the suc-
tion line and filter glass and press the
RESET button if necessary. Back to in-
itial commissioning until the pump deli-
vers water.
Alarm dry running:
This message appears if, for a defined
period, (approx. 90 seconds) there is
no flow and pressure is not built up.
Reset using the RESET button.
The warranty is no longer in effect if:
Efforts have been made to repair the machine
Technical modifications have been made to the
machine
The machine has not been used for its intended
purpose
19