Operating The Fiveeasy™ And Fivego™ Conductivity Meter; Display And Key Controls - Mettler Toledo FiveGo FG3 Bedienungsanleitung

Operating the conductivity meter
4. Operating the FiveEasy™ and FiveGo™ conductivity meter
4.1

Display and key controls

1 Calibration icon - calibration in progress
2 Measurement icon - measurement or calibration is running
3 Setup icon - instrument is in the setup mode
4 Battery status icon (FG3 only) shows the condition of the batteries - fully charged, half-charged or
fully discharged (To replace batteries, see section 3.2)
5 TDS factor in the setup mode
6 Conductivity / TDS / Salinity reading / Cell constant in calibration process
7 Endpoint stability / Auto endpoint
8 Temperature during measurement or reference temperature in setup mode
9 Standard
/ Memory number
6
Five_cond.indb 6
TDS-F
SAL
ATC
Ref.T.
(FG3 only) / Error index
METTLER TOLEDO FiveEasy™ / FiveGo™ conductivity meter
%/ C
psu
mS/cm
mg/L
Cal
C
MR
F
Err
13.03.2007 16:07:41