Pioneer MCS-838 Bedienungsanleitung Seite 86

86 Troubleshooting
En
Problem
Playback does not start.
The computer is not
properly operated.
The audio files stored
on components on
the network, such as
a computer, cannot be
played back.
Media Player 11 or
Audio playback is
undesirably stopped or
disturbed.
9
Check
The component connected to
the network is not properly set.
There are no playable audio
files on the component
connected to the network.
The component is currently
disconnected from this unit or
the power supply.
The corresponding IP address
is not properly set.
The IP address is being
automatically configured.
not currently installed on your
computer.
Audio files were recorded in
(LPCM only), MPEG-4 AAC, and be played back on this unit.
Audio files recorded in MPEG-4
or AAC are being played back
The component connected
to the network is not properly
operated.
The component connected to
the network does not permit
file sharing.
The folder stored on the
component connected to the
network has been deleted or
damaged.
Network connections could be
restricted due to the
computer's network settings,
security settings, etc.
11: You are currently logged
onto the domain through your
Player 12: You are currently
logged onto the domain through
installed.
The audio file currently being
played back was not recorded
in a format playable on this
unit.
The LAN cable is currently
disconnected.
There is heavy traffic on the
network with the Internet being
accessed on the same network.
There is a connection routed
through a wireless LAN on the
same network.
Remedy
If the client is automatically authorized, you need to enter the
corresponding information again. Check whether the connection status
is set to "Do not authorize".
Check the audio files stored on the component connected to the
network.
Check whether the component is properly connected to this unit or the
power supply.
Switch on the built-in DHCP server function of your router, or set up the
network manually according to your network environment.
The automatic configuration process takes time. Please wait.
computer.
Audio files recorded in MPEG-4 AAC cannot be played back on
another server. Refer to the operation manual supplied with your server.
Check whether the component is affected by special circumstances or
is in the sleep mode. Try rebooting the component if necessary.
Try changing the settings for the component connected to the network.
Check the folder stored on the component connected to the network.
Check the computer's network settings, security settings, etc.
Instead of logging onto the domain, log onto the local machine.
Check whether the audio file was recorded in a format supported by
this unit.
Check whether the folder has been damaged or corrupted.
Even audio files listed as playable on this unit may sometimes not be
played back or displayed.
Connect the LAN cable properly.
Use 100BASE-TX to access the components on the network.
There may be a shortage of bandwidth on the 2.4 GHz band used by
the wireless LAN. Make wired LAN connections not routed through a
wireless LAN.
Install away from any devices emitting electromagnetic waves on the
2.4 GHz band (microwave ovens, game consoles, etc.). If this does not
solve the problem, stop using other devices that emit electromagnetic
waves.