Troubleshooting - JVC KW-R920BT Bedienungsanleitung

REFERENCES
Change the display information
Each time you press , the display information changes.
• If the information is unavailable or not recorded, "NO TEXT", "NO NAME", "NO SIGNAL", or
other information (eg. station name) appears.
DAB Service name Title/Artist
Ensemble name Day/Clock
synchronisation *
(back to the beginning)
FM or AM Frequency Day/Clock
synchronisation *
(back to the beginning)
(For FM Radio Data System stations only)
Station name (PS)
Day/Clock Level meter
(back to the beginning)
CD or USB (For CD-DA)
Playing time Day/Clock
meter with color synchronisation *
(For MP3/WMA/AAC/WAV/FLAC files)
Playing time Day/Clock
name Level meter
to the beginning)
USB-IPOD or Playing time Day/Clock
Level meter with color synchronisation *
ANDROID
AUX AUX Day/Clock Level meter
(back to the beginning)
BT AUDIO Playing time Day/Clock
Level meter with color synchronisation *
* The color of the button illumination and display illumination changes and synchronises with
the sound level.
24
Dynamic Label Segment (DLS)
Level meter Level meter with color
Level meter Level meter with color
Frequency Program type (PTY) Radio text+
Level meter with color synchronisation *
Disc name Track title Level meter
(back to the beginning)
Album title/Artist Track title
Level meter with color synchronisation *
Album title/Artist Track title
(back to the beginning)
Level meter with color synchronisation *
Album title/Artist Track title
(back to the beginning)

TROUBLESHOOTING

Symptom
Sound cannot be heard.
"MISWIRING CHECK
WIRING THEN PWR ON"
appears.
"PROTECTING SEND
SERVICE" appears.
Source cannot be selected.
DAB reception is poor.
"CHK ANTENNA"
Level
"RELATED SRV FOUND"
Folder/file
• Radio reception is poor.
(back
• Static noise while
listening to the radio.
Level meter
Disc cannot be ejected.
"IN DISC" appears.
Level meter
"PLEASE" and "EJECT"
appear alternately.
Playback order is not as
intended.
Elapsed playing time is
not correct.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the
terminals of the speaker wires are insulated properly.
Turn the power on again.
Send the unit to the nearest service center.
Check the [SRC SELECT] setting. ( 4)
Make sure [ON] is selected for [DAB ANT PWR].
( 7)
Check the DAB antenna. If a passive antenna (without
a booster) is used, set [DAB ANT PWR] to [OFF].
( 7)
• Press the volume knob to activate Soft-Link. ( 7)
• Press to cancel.
Connect the antenna firmly.
Press and hold to forcibly eject the disc. Be careful
not to drop the disc when it is ejected.
Make sure nothing is blocking the loading slot when
you eject the disc.
Press , then insert the disc correctly.
The playback order is determined by the file name
(USB) or the order in which files were recorded (disc).
This depends on the recording process earlier.