GB
escaping when the appliance is put on
the side or held upside down!) or fire
damage during transport will be at the
sender's expense.
•
The repair or replacement of the
equipment will neither result in exten-
sion of the guarantee period nor the
commencement of a new guarantee
period for the equipment or any re-
placement parts installed as a result
of this work. This also applies if on-
site service is used.
Table maintenance intervals
Maintenance Work
(See "cleaning and mainte-
nance")
Check and tighten screws,
nuts and bolts
Check the engine oil level /
petrol level and refill with en-
gine oil / petrol if required
Clean operating elements /
the area around the silencer
Change the engine oil
Replace the air filter
Clean/adjust the spark plug
Replace the spark plug
Check the silencer and spark
catcher
Clean the air cooling system
Clean more often if there is a high level of dust or heavy dirt
a
84
Before
a
a
•
Defective units returned to us will be
disposed of for free.
Maintenance Intervals
Regularly carry out the maintenance work
listed in the "maintenance intervals" table.
Regular maintenance prolongs the life of
the equipment. It also gives optimum cut-
ting performance and avoids accidents.
After
After
1
st
Work
Hrs.
After
After
5
8 Hrs.
50 Hrs.
Annual