C) Button Functions And Acoustic/Optical Confirmation Signals - Conrad FS20 SN Bedienungsanleitung

c) Button functions and acoustic/optical confirmation signals

The following table is a complete overview of the
FS20 SN button functions. See the following
chapters for detailed operating information.
1 2
short
short
1 s 1 s
5 s 5 s
5 s
5 s
5 s
5 s
5 s
5 s
Acoustic/optical confirmation signals
Depending on programming, the acoustic signal can be deactivated or set to one of three
different pitches. Depending on active channels and the buzzer status, zero to two confirmation
sounds are played when a switching command has been generated (except when operated
manually by pressing the buttons).
The optical signal (confirmation LED, not to be confused with the status LED, see Chapter 8.
c) cannot be deactivated (unless both channels are deactivated). Signalling is as described
for acoustic signalling (chapter 11. f).
3 4 Function
Switch off channel 1
Transmit programmed command, channel 1
short Switch off channel 2
short Transmit programmed command, channel 2
Set time, channel 1
1 s 1 s Set time, channel 2
Address of channel 1
Transmission command of channel 1
On-time of channel 1
5 s 5 s Address of channel 2
5 s Transmission command of channel 2
5 s On-time of channel 2
5 s Set the house code
5 s Factory settings
5 s Activate/deactivate channels
5 s Set buzzer
41