Problem-Solving - Silvercrest SSOT 6 A1 Bedienungsanleitung

Functions / error analysis
Push the battery compartment lid
Lever the battery
Avoid short-circuiting the battery at all cost. A short-
circuit can occur if the screwdriver comes into contact
with the battery and the live parts in the battery
compartment at the same time.
Insert the new battery into the battery compartment.
Note: Ensure correct polarity. The plus sign on the
battery must point upwards.
Push the new battery under the metal nose and press
it down until it clicks into place.
Push the battery compartment lid
compartment until it clicks into place (Fig. A).

Problem-solving

If the appliance cannot take a measurement in the
designated range, it will generate an error message.
This message should help to solve the problem.
Error
Appliance
does not re-
act / automat-
ically resets
itself when
protective fi lm
is removed
26 GB/IE
out with a small screwdriver.
11
Problem
Empty battery?
Wrong battery
polarity?
Faulty battery
contact?
downwards.
10
onto the battery
10
Solution
Insert a new
battery
Removing bat-
tery and insert it
correctly