I) Operating With Fixed Colour Settings (Rgb Operation); Handling - Renkforce GM115-25210 Bedienungsanleitung

i) Operating with Fixed Colour Settings (RGB Operation)

• If required, push the button MENU (7) until the display is in the main menu.
• Push the button UP (8) or DOWN (9) until rEd is displayed.
• Push the ENTER (10) button for confirmation of your selection.
• Push the ENTER (10) button again to get to the brightness setting for red.
• The brightness value for red (rxxx) is displayed (xxx defines the brightness value).
• Set the desired brightness value with the buttons UP (8) or DOWN (9).
• Push the ENTER (10) button for confirmation of your selection.
• Push the button MENU (7) until the display is in the main menu again.
• Proceed with setting of the brightness values for green (GrEE) and blue (bLUE) as described above.
Depending on the individual colour intensities set, different mixed colours can be created.

12. Handling

• Never connect the mains plug to a mains socket immediately after the device has been taken from a cold
to a warm environment. The resulting condensation may destroy the device. Allow the device to reach
room temperature before connecting it. Wait until the condensation has evaporated.
• Never pull the mains plug from the mains socket by the cable. Only pull it from the mains socket by the
intended grip areas.
• Always pull it from the socket using the intended grips.
• Disconnect the mains plug from the mains socket during thunderstorms for reasons of safety.
• Never put any filter foils, masks or other materials over the light exit. This may cause heat damage and
danger of fire.
• The device may heat up during operation. Never touch the casing during operation. Let the effect light
cool off after operation before touching or cleaning the casing.
• Do not cover the device to ensure sufficient ventilation. Air circulation also must not be impaired by any
objects like magazines, tablecloths, curtains, etc. During operation, keep a minimum distance of 0.5 m
around the device.
39