Cleaning And Maintenance; Technical Specifications - Velleman RCQC5 Bedienungsanleitung

360° Flip
After the basic manoeuvres and having clocked up enough flying hours, you can now do some
spectacular aerobatics!
One of those stunts is the 360° flip or roll. To do so:
1. Keep your drone hovering at a steady height of minimum 3 m.
2. Press the 3D flight button. Move the cyclic stick to the left, the right, forward or backward.
3. You will now have completed a perfect 360° roll, left, right, forward or backward according to your
cyclic stick movement!
Only use the 3D flight with fully-charged quadcopter and remote control
batteries, and in an open-space area without obstacles.
To avoid damaging the circuit board, immediately push the throttle stick
to the lowest position if the drone has crashed.
8. Troubleshooting
No response from the drone.

The battery of the drone is insufficiently charged. Charge the battery.

The batteries of the remote control are insufficiently charged. Charge or replace the batteries.

The bandwidths of the remote control and the drone do not correspond. Choose the same
bandwidth for both the remote control and the drone by synchronizing the remote control and
the drone.
The drone is slow to respond or difficult to manoeuvre.

The battery of the quadcopter is insufficiently charged. Charge the battery.

The batteries of the remote control are insufficiently charged. Charge or replace the batteries.

The drone is out of remote control's range. Do not fly the drone too far from the remote
control. The range depends on the environment and surrounding objects.
9.

Cleaning and Maintenance

The drone does not need any particular maintenance. However, occasionally wipe it with a damp cloth to
keep it looking new. Do not use harsh chemicals, cleaning solvents or strong detergents.
10.

Technical Specifications

transmitter channels ............................................................................................ 4
control signal ............................................................................................. 2.4 GHz
material .......................................................................... plastic and electronic parts
power supply
drone ............................................. rechargeable 3.7 V, 220 mAh lithium-polymer
transmitter ............................................................... 4 x 1.5 V AA/LR6 (not incl.)
charging time ..........................................................................................± 45 min.
flying time ................................................................................................5-6 min.
charging mode ......................................................................... via USB cable (incl.)
state of assembly ........................................................................ ready-to-fly (RTF)
drone dimensions ............................................................................ 15 x 15 x 38 cm
V. 01 – 15/05/2017
RCQC5
WARNING
8 ©Velleman nv