Target group for this manual
2.2
Handling electrical cables
WARNING!
!
The electrical power supply may only be connected by a quali-
fied electrician (e.g. according to VDE 0100, Part 721 in
Germany).
CAUTION!
!
Fit a fuse of at least 10 amps to the vehicle's power supply con-
nection.
Attach and lay the cables so that they cannot be tripped over or
damaged.
NOTICE!
A
Use cable ducts to lay cables through walls with sharp edges.
Do not lay loose or bent cables next to electrically conductive
materials (metal).
Do not pull on the cables.
3
Target group for this manual
The instructions in this manual are intended for qualified personnel at work-
shops who are familiar with the guidelines and safety precautions to be ap-
plied.
36
TEC29, TEC29LPG
EN