Pneumatic Hammer Function; Maintenance And Cleaning - Batavia 93 32 26 Bedienungsanleitung

Right Hand Direction (Clockwise):
Use for drilling, impact drilling, tightening screws. Press the selector switch for the
direction of rotation to the right as far as wit will go.
Left Hand Direction (Counter Clockwise):
For loosening screws. Press the selector switch for the direction of rotation to the
left as far as it will go.

Pneumatic Hammer Function

With the selector switch you can select Hammer Drill Function and Drill Function
only without hammer function. The toggle switch engages or disengages the
hammer function. Only change-over the function while the motor is at a complete
standstill.
1. To use the Hammer Drill Function turn the selector switch in direction to the
"hammer/drill symbol".
2. To drill only and loosen screws, turn the selector switch in direction
"screw/drill symbol".

Maintenance and Cleaning

Always keep the unit clean, dry and free from oil.
Use only a dry or slightly moist cloth for
cleaning the housing.
Do not use
substances such as benzene, solvents,
turpentine or similar.
Regularly clean the space between the
rubber ring and the SDS-Plus chuck. First
open the rubber ring and remove dust, dirt
and grease residues. Apply grease into the
space and close the rubber ring.
Operation
abrasives or flammable
13