Battery Mounting - Hubsan X4 FPV H107D Bedienungsanleitung

4.2 Battery Mounting

Notice: > Do not mix old and new batteries
> Do not mix different types of batteries
> Do not charge non-rechargeable batteries
> Only 4 x AA type battery, other's will broke transmitter
PUSH
Take out the cover
Notice:
1. The video will stop when the TX battery is low, and it can't recording either.
2. When the SD card is full, it can't recording and the screen will display "SD Full".
3. It is better to use an SD memory card with a memory of 4 GB or larger and a speed
class of 4 or higher.
4. When power on the TX, the red LED will blink quickly, the LCD screen is black, which
indicates the battery is low, you can not bind the TX and X4. Please change new
batteries in the TX.
5. When flying the X4, the red LED on the TX blinks quickly, LCD screen turns black,
which indicates the TX battery is low, it can still control the quad, so please manage
to land the qaud and change new batteries in the TX.
6. The TX can only use 4 x AA dry battery. Other battery will damage the TX.
8
• THE HUBSAN X 4
Install 4 x AA battery
according to the correct polarities
PUSH
Return the cover