Werbung
Accelero S1 Rev.2 is compatible with SLI configuration by having a longer flexible SLI cable to
go around the top of heat sink that connects both cards. The bundled SLI cable from
motherboard is usually not long enough. A 12cm long SLI cable can be purchase in our online
Shop if necessary.
ATI Radeon X1950Pro requires an extra Voltage Regulator Heat Spreader Module.
ATI Radeon X1950XTX (PWM edition) modifications instructions
Voltage Regulator Heat Spreader Module
Voltage Regulator heat spreader module is designed to fit for all X1950Pro graphic
cards meeting ATI standard layout (reference design). However there are not every graphic card
manufacturers following the standard board design. For example some AGP graphic cards have
difference layout and some designs basically not required to install Heat Spreader. The following
drawings show the ATI standard board layout with Voltage Regulator Heat Spreader installation.
Please check your graphic card to have the proper installation of the Voltage Regulator Heat
Spreader.
Mod of Voltage Regulator Heat Spreader Module for Sapphire X1950Pro AGP
Since Sapphire X1950Pro AGP card places 2 power sockets on the card and one of the power
socket conflicts with the Voltage Regulator Heat Spreader Module. Users can cut off a small
piece of Voltage Regulator Heat Spreader away to resolve the conflict. Another method is to stick
RAM heat sinks on the voltage regulator for heat dissipation.
Werbung
