Verwandte Anleitungen für ARCTIC COOLING Accelero S1
Inhaltszusammenfassung für ARCTIC COOLING Accelero S1
- Seite 5 Heat Sink: 138(L) x 215(W) x 33(H) mm Accelero S1 Rev. 2 Heat pipe: 6 mm x 4 Weight: 268 g Accessories: 2 Voltage Regulator Heat Spreaders 8 Memory Heat Sinks Warranty: 6 Years Application: ATI: Radeon HD 38xx series, 36xx series, 2600,...
- Seite 6 With the help of the new mounting design, Accelero S1 Rev. 2 is widely compatible with high end ATI and nVIDIA graphic cards. Accelero S1 Rev. 2 can still be paired with the Turbo Module – the twin fans add-on, which...
- Seite 7 Accelero S1 Rev. 2 with enhanced cooling performance under extremely quiet operation. Turbo Module helps boost up the GPU and memory overclockability, squeezing more graphic performance than ever before.
- Seite 8 The Accelero S1 Rev. 2 not only cools both high performance GPUs, absolutely noiseless and maintenance free, but it also achieves a far lower temperature when compared to the standard coolers and thus offers overclocking potential and a longer service life.
- Seite 9 Accelero S1 Rev.2 is compatible with SLI configuration by having a longer flexible SLI cable to go around the top of heat sink that connects both cards. The bundled SLI cable from motherboard is usually not long enough. A 12cm long SLI cable can be purchase in our online Shop if necessary.
- Seite 10 The modded Voltage Regulator Heat Spreader Module installed on Sapphire X1950Pro AGP card. Compatibility With this height restriction drawing you can check your VGA board for compatibility with our cooler. First you have to check the position of the mounting holes. Then check the height of the components.