Buffalo MiniStation HD-PCU2 Benutzerhandbuch Seite 197

Procedure when the screens below are displayed
10
11
12
Enter information for [Volume label] if necessary.
Unless there is a particular problem with [Allocation unit size], use the default setting.
Caution If this product does not have any partitions, do not insert a check mark for ［ Perform
a quick format]. If a check mark is inserted, the formatting process may not be
completed normally.
6
Formatting Guide
① Click to select [Primary Partition].
② Click [Next].
① Specify the size in [Simple volume size]
([Partition size] or ［ Amount of disk space
to use]).
If the size does not need to be changed, the partition is
created at the default setting (maximum size).
② Click [Next].
① Click [Assign the following drive letter],
and specify the drive letter.
Unless you need to change to a specific setting, use the
default setting.
② Click [Next].
① Click to select [Format the volume
(partition) with the following settings].
② Select [NTFS].
③ After setting each option, click [Next].
Go to Next Page