Abus TVIP52500 Bedienungsanleitung Seite 96

English
„Recording name": Enter a name to define the recording.
„Enable this recording": Activate in order to use these settings.
„Priority": Higher priority is used first.
„Source": The source can be video stream 1 to 4.
„Schedule ": Set to use the recording schedule.
„Network fail ": Set to record if a network failure occurs.
"Sun - Sat": Choose the weekday these settings are valid for
„Always": Use the settings for 24 hours.
„Sun - Sat": You can set a certain time for the recording.
„Destination": Select the target to write to (SD-card or network folder)
„Entire free space": The maximum available data capacity of the target will be used.
„Reserved space": Here you can limit the data capacity of the target. The capacity has to be at least the
same as the capacity of the ring memory.
„Enable cyclic recording ": Here you can activate the ring memory. If the data capacity is reached the
oldest data gets overwritten.
Recording settings
„Name (Video)": Opens the recordings config page.
„Status (ON)": Here you can turn the recording ON/OFF.
„Destination (SD)": Shows list with all recordings.
96