Waeco CAM10 Montage- Und Bedienungsanleitung Seite 33

CAM10, CAM10C
Note
I
Only start sealing through-holes when you have completed all installation work
on the camera and have laid the required cable lengths.
7.4 Connecting the camera to an electricity supply (fig. f, page 8)
The circuit diagram for the camera can be found in fig. f, page 8.
No. Description
1 Monitor M150L/M170L
2 13-pin DIN plug
3 Connection cable
4 13-pin DIN socket
5 12 V positive cable (red): Connection to the positive pole of the voltage source
6 Earth cable (black): Connection to the negative pole of the voltage source
7 5-pin mini DIN socket
8 Filter
9 Cable (green): Control input for the connection to the reversing lights
10 CAM10: 5-pin DIN plug
CAM10C: 5-pin mini DIN plug
11 System cable
12 6-pin mini DIN socket
13 6-pin mini DIN plug
14 Camera
15 Monitor RV-45: 8-pin socket (power supply)
16 Monitor RV-45: Mirror function dip switch
17 Monitor RV-45: 5-pin DIN socket (input)
Mounting the camera
33