Assembly Instructions; Safety Precautions; Pack Contents; Assembly Diagrams - BERG Champion 9 ft 270 Bedienungsanleitung

Assembly instructions

IMPORTANT!
Please fill in the warranty certificate completely and correct. Page 10.
First read the safety precautions that accompany the BERG trampoline before you start to assemble
it. Please pay particular attention to the photos.
The BERG trampoline can be assembled without special tools.
Wear protective gloves to prevent any injuries during assembly.

• Safety Precautions

- The BERG trampoline is designed to be installed on a soft, flat surface such as grass
or sand, with a surrounding clear area of at least 2 metres. Placing on a hard and/or
smooth surface is not permitted for safety reasons.
- There must be a clear space of at least 2 metres all around the BERG trampoline,
free of trees, fences or any other obstacle.
- Above the BERG trampoline, there must be clear space to a height of at least 7
metres from the surface on which the BERG trampoline is standing.

• Pack contents

BERG Champion BERG Champion
9 ft (270)
8 round section rails 8 round section rails
- 8 leg sections
4 lower legs 4 lower legs
48 springs 72 springs
1 protective pad 1 protective pad
1 spring mat 1 spring mat
- -
1 spring tightener 1 spring tightener
2 protective surrounds 2 protective surrounds 2 protective surrounds 2 protective surrounds 2 protective surrounds
1 manual 1 manual
• Assembly diagram for BERG Champion 9 ft (270):
1
5
BERG Champion
11 ft (330) 12,5 ft (380)
8 round section rails
8 leg sections
4 lower legs
80 springs
1 protective pad
1 spring mat
-
1 spring tightener
1 manual
2
Click
6
BERG Champion BERG Champion
14 ft (430)
8 round section rails 10 round section rails
8 leg sections 10 leg sections
4 lower legs 5 lower legs
96 springs 110 springs
1 protective pad 1 protective pad
1 spring mat 1 spring mat
1 short ladder 1 short ladder
1 spring tightener 1 spring tightener
1 manual 1 manual
3
7
15 ft (460)
4
8
2