4. The upper menu
The functions HOLD, MAX and MIN can be selected in the
upper menu.
The selection is made with
is confirmed with
. The confirmed function is indicated statically
in the display. You can exit the menu with
anything for 20 seconds.
HOLD "freezes" the measured value.
MAX represents the maximum value in the activated time period.
MIN represents the minimum value in the activated time period.
, the selected function blinks and
or by not pressing
Operating manual – English
5. The lower menu
The ALARM function can be selected in the lower menu.
The selection is made with
is confirmed with
. The confirmed function is indicated statically
in the display. You can exit the menu with
anything for 20 seconds.
Set the desired alarm threshold value with
with
. The set alarm threshold value is then permanently stored
until it is next changed.
, the selected function blinks and
or by not pressing
and
and confirm
B - 05