Commissioning, Fi Tting The Batteries - Conrad 67 20 72 Bedienungsanleitung

7. Commissioning, fi tting the batteries
• Open the battery compartment on the back of the product.
• Insert four AA batteries (mignon) observing the correct polarity (positive and negative poles!).
All display elements will appear briefl y and a beep is audible. Then, "0:00:00" appears in the top
display line with a fl ashing radio tower symbol next to it. This symbol indicates that the device is
searching for the DCF signal.
• Close the battery compartment.
The supplied power pack serves only to supply power to the backlighting if this is
to remain activated. The batteries should be fi tted at all times to ensure that the
product continues to be supplied with power even if the power fails.
• Place the product on an adequately-sized, smooth, clean and stable surface.
• It can take 3 to 5 minutes until the DCF time is received correctly and displayed. If the signal
is correct, the radio tower symbol will be displayed (not fl ashing).
Do not place the product close to electric or electronic devices (tel-
evision sets, computers, power cables, etc.) or metal components (metal
windows, doors, heating elements). This will interfere with the recep-
tion. Do not move the product, this can also impede signal reception.
If no reception is possible, the radio tower symbol will disappear. Move the
product and start another reception trial (press the"SET/WAVE" (3) button until
a radio tower symbol appears or remove the two battery briefl y and then refi t).
You can also set the date and the time manually.
23