Physical Descriptions; Mounting; Power Supply; Ventilation - Abus TVAC10041 Bedienungsanleitung

4. Physical descriptions

1

Power supply

2 HDMI input
3 VGA input
4 PC audio input
5 Audio input R
6 Audio input L
7 Video input 1
8 Video output 1
9 Video input 2
10 Video output 2

5. Mounting

5.1 Power supply
Before starting installation, ensure that the power supply voltage and the rated voltage on the power
supply unit are identical.

5.2 Ventilation

Please provide sufficient ventilation. The cooling openings may not be covered for sufficient ventilation.

5.3 Wall Mount

For mounting the monitor at a wall please use a VESA compatible wall mount. At the backside of the
monitor there are squarely arranged assembly holes (Middle distance 75 mm). These are compatible with
the ABUS TVAC10500 wall mount.
Please also pay attention to the installation manual of the wall mount.
During the mounting of the TFT monitor it must be separated from the mains voltage.
DC 12V / 3 A,
Only use the power supply unit provided for operating the monitor!
Port for multi-media data
PC and DVR signal input
3.5 mm jack, audio signal input coupled with the VGA input
Cinch input R, audio signal input coupled with the video inputs.
Cinch input L, audio signal input coupled with the video inputs.
Composite video signal input 1 (BNC)
Looped-through video signal output 1 (BNC)
Composite video signal input 2 (BNC)
Looped-through video signal output 2 (BNC)
25
English